Featured Projects
Selected engineering, prototype development and marine technology projects across additive manufacturing, digital scanning and custom fabrication workflows.
CAD development and engineering support for a modular marine pontoon system, progressing from digital configuration and component detailing to full-scale fabrication.
Marine Engineering · CAD Development · Modular Systems
Completed November 2025
Modular Pontoon Engineering
Physical scale models of the modular pontoon system. Designed and additively manufactured for configuration review and showcase
Additive Manufacturing · Scale Modelling · Marine Projects
Completed November 2025
Commissioned Marine Scale Models
Modular Desk Support Prototype
Design and multi-material additive manufacture of a modular desktop support, printed with a distinct core material at each mounting-hole insert, separate from the main body. The physical prototype was used to evaluate assembly, fit and practical desk integration.
Product Design · Modular Systems · Functional Prototyping
Completed May 2026
CAD Development & Detailing
Detailed CAD development of the support body, mounting-hole inserts, locking components and attachment interfaces, including the dual-material interface between body and insert. Dimensioned drawings were produced to control fit, alignment and repeatable manufacture
CAD Development · Technical Drawing · Multi-Material Manufacturing
Completed May 2026
Yacht Hull Reconstruction 3D Scanning
On-site capture of the yacht’s external hull geometry using terrestrial 3D scanning while the vessel was supported ashore.
Marine Scanning · On-Site Capture · Hull Geometry
Completed June 2026
Yacht Hull Reconstruction Point Cloud
Registration and processing of multiple scan positions to create a coordinated digital record of the vessel’s hull and surrounding geometry.
Point-Cloud Registration · Digital Capture · Marine Survey
Completed June 2026
Yacht Hull Reconstruction Digital Model
Development of a consolidated digital hull model from the registered scan data for documentation, geometry reference and future engineering work.
Hull Reconstruction · Mesh Processing · Engineering
Completed June 2026
Parametric Pipe Clamp Design
"Parametric CAD design of a two-piece split pipe/rail clamp covering 20mm, 25mm and 32mm sizes from a single model.
Concept stage — design complete, not yet printed or tested.
Materials Engineering · Testing · Additive Manufacturing
August 2026
Pipe Clamp Material & Fit Testing
"Fit-check and material comparison for the split pipe/rail clamp, testing PETG/PLA prototypes against PA6-GF, PETG-CF and ASA for the marine-exposed load case.
Planned — testing not yet started."
Materials Engineering · Testing · Additive Manufacturing
August 2026
Sailing Pulley — Concept Design
CAD concept for a single-sheave 3D-printed sailing block, including the shackle attachment, bolted sheave axle and rivet details. Basis for the physical prototype build
Marine Engineering · Additive Manufacturing · Functional Prototyping
September 2026
Sailing Pulley
Prototype
Physical 3D-printed prototype of the single-sheave sailing block, assembled with a stainless shackle, bolted axle and rivets. Used to evaluate fit, assembly and finish ahead of structural testing.
Concept under development — working-load ratings have not yet been established
September 2026
